Alcatel one touch Fire 4012X Manual page 9

Installing and removing the microSD card
To release the microSD card holder, slide it in the direction of the
arrow and lift it. Then insert the microSD card with the golden contact
downwards. Finally, lower the microSD holder and slide it in the opposite
direction to lock it.
Installing or removing the battery
Please power off your phone before removing the battery.
• Insert and click the battery into place, then close the phone cover.
• Unclip the cover, then remove the battery.
IP4640_4012X_UM_Eng_GB_03_131223.indd 15-16
15
Charging the battery
Connect the battery charger to your phone.
• Make sure the battery is correctly inserted before connecting the
charger.
• When using your telephone for the first time, charge the battery fully
(approximately 5 hours).
If the battery is very low, there will be no indication that power is
being received until the charge is sufficient to show the charging
status bar. To reduce power consumption and energy waste, when
battery is fully charged, disconnect your charger from the plug; switch
off Wi-Fi, GPS, Bluetooth or background applications when not in use;
reduce the backlight time, etc.
1.2.2 Power on your phone
Hold down the Power key until the phone powers on, unlock your phone
(Slide up and touch the unlock icon
and confirm. The Home screen is displayed.
1.2.3 Power off your phone
Hold down the Power key until the pop-up menu appears, select Power
off.
, input your passcode) if necessary
16
12/23/2013 3:11:10 PM