installation & maintenance
ASSEMBLING THE RAT PROTECTION PANEL (OPTION)
Tilt the washer a little and lift up the panel until it clicks, fi nally fi x the panel with screw to the
base as shown in the fi gure.
1. Insert the rat protection panel to the
assembling hole on back side to the end.
HOW TO CONNECT THE DRAIN HOSE (OPTION)
IN CASE OF PUMP-DRAINED WASHER
Take out the cap-hose and connect the
outlet-hose.
Be sure to join tightly the drain hose into the
drain-outlet on the side of the machine.
GAIA-Sniper_DC68-02910B_EN (India)_140731.indd Sec5:16
GAIA-Sniper_DC68-02910B_EN (India)_140731.indd Sec5:16
Rear-side
2. If you have diffi culty inserting the panel lift
up the washer a little and insert it.
cap-hose
Be sure to join tightly the drain hose into the
drainoutlet on the back of the machine.
Install the drain hose in the position of about
90~100 cm above the ground.
English - 16
2014-07-31
2014-07-31
5:59:29
5:59:29