Assembling The Rat Protection Panel (Option); How To Connect The Drain Hose (Option) - Samsung WA12B9 User Manual

installation & maintenance

ASSemBLING THe RAT pROTeCTION pANeL (OpTION)

Tilt the washer a little and lift up the panel until it clicks, finally fix the panel with screw
to the base as shown in the figure.
1. Insert the rat protection panel to the
assembling hole on back side to the end.

HOW TO CONNeCT THe DRAIN HOSe (OpTION)

IN CASe Of pUmp-DRAINeD WASHeR
Take out the cap-hose and connect the
outlet-hose.
Be sure to join tightly the drain hose into
the drain-outlet on the side of the machine.
18_installation & maintenance
WA12B9DEP-02961J-01_EN.indd 18
Rear-side
2. If you have difficulty inserting the panel lift
cap-hose
Be sure to join tightly the drain hose into the
drainoutlet on the back of the machine.
Install the drain hose in the position of about
90~100cm above the ground.
up the washer a little and insert it.
2012-12-18 4:43:13