Maintenance; Problems And Solutions - Imetec 14415-BS3-300 Operating Instructions Manual

Type f0601
Table of Contents

Advertisement

noTE
To weigh yourself again, step off the scales and wait for the weight to disappear from the display
and and then step back on the scales.
The weight scales switches off automatically 10 seconds after being switched on.
We recommend removing the batteries if you do not intend to use the machine for a long period
of time.

MAInTEnAnCE

CLEAnInG
ATTEnTIon!
Do not use acid, abrasive, corrosive or chemical solvents.
Clean the glass surface using a soft damp cloth.

ProBLEMS AnD SoLuTIonS

There are no parts that can be repaired by the user. Should one of the problems indicated
occur, adopt the proposed solution.
Problem
The display shows the
symbols below:
The display shows the
symbols below:
Possible cause
Flat battery (the scales
will switch off within a few
seconds).
Excessive weight on the
scales.
Solution
Change the batteries.
Remove the weight from the
scales.
GB
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

F0501

Table of Contents