Valco baby BUGGSTER BASSINET Product Reference Manual

valco

baby

PRODUCT REFERENCE GUIDE

BUGGSTER BASSINET

Thank you for purchasing a quality VALCO product. Please read and follow the instructions outlined in this

guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all

the warnings and safety guidelines before use.

Retain this guide in a safe place for future reference.

Due to our policy of continuous product

development, this product is constantly

evolving. It is possible that some features

or procedures outlined here have changed

since this document was written. If you are

unsure of any procedure shown here, please

au to obtain the most up to date information

before use. Include the batch number, which

can be found on a sticker on the frame.

All pictures and diagrams herein are provided

for illustration purposes only. Actual product,

colour or fabric may vary. VALCO reserves the

right to modify or alter any specification or

colour without notice or obligation to modify

any product previously purchased

FURTHER INFORMATION

In Australia/New Zealand

www.valco.com.au

www.valco.co.nz

In North America only

www.valcobaby.com

1800 610 7850

Table of Contents

Need help?

Do you have a question about the BUGGSTER BASSINET and is the answer not in the manual?

Page 1 PRODUCT REFERENCE GUIDE BUGGSTER BASSINET Thank you for purchasing a quality VALCO product. Please read and follow the instructions outlined in this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all the warnings and safety guidelines before use.
Page 2 REMOVE THE FRONT BUMPER BAR FIGURE A 1. Press the locking button on the inside of the bumper bar housing (1) and lift it out. Repeat for the other side. REMOVE THE STROLLER FABRICS FIGURE B 1. Disconnect the seat tethers at the rear of the seat from the frame by pushing firmly on the long side of the clip, forcing the rivet head through the narrow channel (2).
Page 3 FIGURE E 1. Aligning the tracks at the rear of the bassinet adaptor with those in the uncovered hinge, slide the adaptor (7) downward onto the hinge, until you feel it secure in place. Repeat for the other side. FIGURE F 1.
Page 4 WARNINGS Your child’s safety is your responsibility ……… •This carrycot must not be used on a stand. •Never leave your child unattended. •Please grip the harness of the carrycot in such a way that you keep the carrycot balanced and the carrycot with the child remains in the horizontal position.