Table of Contents
Advertisement
English
CHARGING A BATTERY PACK
The DWST1-75663-GB / DWST1-75664-XE includes a top compartment that is mainly used to
store and protect the AC/DC power adaptor when not in-use.
1.
Open the top compartment to take out
the AC/DC power adaptor (see Figure 1
and Figure 3).
2.
Plug the charger AC/DC power adaptor
into an appropriate outlet and connect
it to the DWST1-75663-GB / DWST1-
75664-XE power-in port before inserting
the battery pack (see Figure 2).
3.
Open the battery pack cover by
releasing its two latches (see Figure 2).
4.
Insert the battery pack (not included) into
the charger, making sure the pack is fully
LCD INDICATORS
When the appliance is turned OFF
When charging a battery pack while the
appliance is turned off, a large battery image
is displayed in the center of the LCD screen
showing the battery pack charging status.
Battery pack is empty
Battery pack level is low
Battery pack is partially charged
Battery pack is fully charged
Hot/Cold Delay
This charger has a hot/cold delay
feature: when the charger detects a
battery that is hot, it automatically
starts a delay, suspending charging
until the battery has cooled. After
the battery has cooled, the charger
automatically switches to the
pack charging mode. This feature
ensures maximum battery life.
14
seated in the charger
see Figure 4). The battery indicator
image will blink continuously, indicating
that battery charging is in process.
NOTE: Close the battery pack cover and
check it is tightly closed.
5.
The completion of charging will be
indicated by a steady battery indicator
image. The pack is fully charged and
may be used at this time or left in the
charger.
When the appliance is turned ON
When the DWST1-75663-GB / DWST1-75664-
XE is on, indicators for the power supply and the
battery status are displayed on the lower right
portion of the LCD screen.
Appliance is operating via the AC/
DC power adaptor
Battery level is low
Battery is partially charged
Battery is fully charged
Hot/Cold delay of charging
When the appliance is turned OFF
Faulty Battery Packs
This charger will not charge a
faulty battery pack. The charger
will indicate faulty battery pack by
displaying an X on the LCD battery
image. If this occurs, re-insert the
battery pack into the charger. If the
problem persists, try a different
battery pack to determine if the
charger is working properly. If the
new pack charges correctly, then
the original pack is defective and
should be returned to a service
center or other collection site for
recycling. If the new battery pack
elicits the same trouble indication
as the original, have the charger
and the battery pack tested at an
authorized service center.
NOTE: This could also mean a
problem with a charger
WARNING: To reduce the risk of injury, turn the appliance off and disconnect it from the
power outlet when not in use and when making repairs. DO NOT attempt to disassemble the
unit; take it to an authorized service center when service or repair is required.
OPERATION
The DWST1-75663-GB / DWST1-75664-XE
is equipped with memory capacity in order to
store the selected radio channels and paired
Bluetooth devices.
NOTE: The music mode will operate when
connected with the AC/DC power adaptor
and/or when operated solely on battery
power.
NOTE: When the DWST1-75663-GB /
DWST1-75664-XE is connected by the
supplied power supply unit to the outlet it
will charge the installed battery. Unplugged,
the appliance can run up to 8 hours on a fully
charged battery using a premium 2Ah XR
Li-ion battery. Using batteries of lower voltage
and amp hours will yield less run time.
This appliance can be operated in the vertical
or horizontal position.
NOTE: This product has two internal aerials
that contribute to its ruggedness by omitting
an external aerial that can be bent or broken.
These aerials work together to provide 360
degree radio reception without the need of
extending and tuning an extruding antenna
English
When the appliance is turned ON
Problem with the battery pack or
charger
as required by other radios. In order to
improve reception in very low signal areas we
recommend placing the ToughSystem Music
in the vertical position so the handle is facing
upwards, or moving the radio closer to a
window or opening.
Button Functions
The front panel includes a selection dial and
pushbuttons.
.......Selection dial (the selection dial has
more than one function)
...........On/Off button
...........Back button
...........Source selection button
...........Bluetooth button
........Preset buttons
Powering ON and OFF
Press the POWER button (
) for 1 second.
The appliance turns on to the last selected
audio source.
Press the POWER button (
) for 3 seconds.
The appliance turns off.
15
Hide quick links:
Advertisement
Table of Contents
