Turning Off Bluetooth; Resetting The Unit - Sony CAS-1 Troubleshooting Manual

Turning off BLUETOOTH

1
Press the  (on/standby) button of the unit to turn on the
unit.
2
Press and hold the input select button and
PAIRING button of the unit simultaneously for more than 4
seconds.
The LED status indicators flash from right to left when BLUETOOTH
turns off.
To turn on BLUETOOTH, operate step 2 again. The LED status
indicators flash from left to right.
Hint
If you disconnect the AC cord (mains lead) from the wall outlet when the
unit is turned off, BLUETOOTH turns on automatically when the unit turns
on again.
Note
If you turn off BLUETOOTH, all the BLUETOOTH and NFC features become
unavailable when the unit is turned on, enters standby mode or enters
BLUETOOTH standby mode.
8
GB

Resetting the unit

If the unit still does not operate properly even after checking the
troubleshooting, or when you fail setting, reset the unit.
1
Press the  (on/standby) button of the unit to turn off the
(BLUETOOTH)
unit.
2
Press and hold the  (on/standby) button of the unit for
over 10 seconds while the unit is turned off.
After the LEDs above the volume control quickly flash, the unit
enters the standby mode automatically, and all settings of the unit
will return to the factory defaults as follows:
 All the BLUETOOTH pairing information are deleted.
DIMMER: Bright

Low Volume Mode: On

DSEE HX: Auto

BLUETOOTH LDAC: On

 BLUETOOTH Standby: Off
 MUTING: Off
 INPUT: BLUETOOTH
Note
If you initialize the unit, BLUETOOTH connections with an iPhone/iPod may
not work. In this case, delete the unit from the paired device list of your
iPhone/iPod, and then perform pairing again.