Table of contents What’s in the box Set up Connection Playback Unique playback of Walkman and smartphone Part Names Refer to the supplied “Precautions / Troubleshooting” for the information such as specifications or notes on use of the unit.
What’s in the box Main unit (1) AC adapter (1) AC cord (mains lead) (1)* Remote control (button battery included) (1) Speaker (2) Speaker cord (2) Speaker base (2) Spike (Large) (4) USB cable (1) Operating Instructions (this document) (1) Precautions / Troubleshooting (1) Warranty (1) * The shape of the AC cord varies depending on the country or region.
Page 5
Prepare the remote control Pull out the insulating sheet of the battery in the remote control. Insulating sheet...
Set up Basic installation • Separate the right and left speakers (either speaker can be used as left or right). • Place a supplied speaker base under each speaker. • Peel the seals off from the bottom of the speakers. Using the speaker base Turn the side with the grips down.
Page 7
Changing the spikes To enjoy better quality sound on a desk • Tilt the speakers by changing to the supplied spikes (large). • Place the speakers 70 cm - 75 cm apart. • Position the speakers facing inwards. Left speaker (L) Right speaker (R) Peel the seal off 70 cm ~ 75 cm...
Connection Turning on the unit AC cord (mains lead) (supplied) AC adapter (supplied) Point the remote at the (on/standby) button on the front of the unit when you operate it.
Page 11
The unit uses LED to inform you of the volume level and the mute status. For details, see page 27. The circular indents mark the minimum and maximum volume levels.
Playback Listening to music by connecting your device Select the appropriate way for your device from the following. NFC function built-in iPhone / Smartphone / Walkman Smartphone / Walkman® Wireless connection by one-touch Wireless connection Listening to music on a smartphone or a Walkman Listening to music on an iPhone, a smartphone or that have NFC function a Walkman...
Page 13
USB flash drive PC / Mac Connecting a USB flash drive Connection via a USB cable B (USB-B) port A (USB-A) port Listening to music in a USB flash drive Listening to music on a PC page page...
Page 14
Listening to music on a smartphone or a Walkman with Playback NFC function NFC (Near Field Communication) Activate NFC on your device and touch the NFC is a technology for short-range wireless unit with it. communication between devices. By touching NFC enabled devices, BLUETOOTH® pairing and connection of devices will be done automatically.
Page 15
Complete the BLUETOOTH connection by Play back music on your device with a following the on-screen instructions on music playback app. your device. You can use SongPal for playing back music (page 31). The BLUETOOTH input LED stops flashing and remains lit when the BLUETOOTH connection is established.
Page 16
Listening to music on an iPhone, a smartphone or a Playback Walkman Pair your device with the unit (first time only). Turn on BLUETOOTH on your device, then place it within 1 m of the unit. To listen to music via BLUETOOTH, pair your device with the unit according to the following procedure.
Page 17
Press the PAIRING button to set the unit to Set your device to the pairing mode and pairing mode. select “CAS-1” from the BLUETOOTH device list. The BLUETOOTH input LED starts flashing rapidly. If a passcode is required, enter “0000.”...
Page 18
Listening to music on an iPhone, a smartphone or a Walkman Wait until the BLUETOOTH input LED stops Play back music on your device with a flashing and remains lit. music playback app. Pairing is complete and the BLUETOOTH connection is You can use SongPal for playing back music (page 31).
Page 19
Listening to music of a paired device Press the (BLUETOOTH) button of the remote. The BLUETOOTH input LED starts flashing. Select “CAS-1” from the paired device list on your device. Wait until the BLUETOOTH input LED of the unit stops flashing and remains lit.
Page 20
Playback Listening to music in a USB flash drive Press the USB-A button. Open the cover of the A (USB-A) port. The USB-A input LED flashes, then remains lit.
Page 21
Connect a USB flash drive. Play back music by using the / / / buttons. The USB-A input LED stops flashing and remains lit when reading of the USB flash drive is complete. USB flash drive...
Page 22
USB cable. Windows Vista*: The appropriate driver software needs to be downloaded and installed manually. Access the URL below and input “CAS-1” in the search window. Then click [Software and Downloads], and download drivers for CAS-1. For procedures of driver installation and app operation, refer to the same URL.
Page 23
Play back music with a music playback software. Set the sound device setting of your computer to “Sony Audio,” or apply settings that are mentioned in “To play back Hi-Res Audio files on your PC” (page 24). When music is not played back normally, refer to the separate “Precautions / Troubleshooting”...
Page 24
Set the audio output setting of the music playback Visit the website from the URL below. In the software on the PC to ASIO (Audio Stream Input website, input “CAS-1” in the search window and Output) device and select [Sony Audio Driver]. click [Software and Downloads]. Then download If [Sony Audio Driver] cannot be selected, use the “Media Go”...
Playback Unique playback of Walkman and smartphone To play back Hi-Res Audio files on your To play back music on Walkman while device* with their original sound quality charging Connect your device to the B (USB-B) port of the Connect your device to the unit with a USB cable (not supplied) that is appropriate for both the ...
Part Names Unit (front/top) N-Mark (page 14) (on/standby) button / Remote sensor Input LED indicators Indicates the state of selected input source. The source is selected. (BLUETOOTH) Waiting The source is selected. A (USB-A) Loading B (USB-B) The source is selected.
Page 27
LED status indicators Volume control A (USB-A) port (page 20) Indicates volume level by lighting position. (headphones) jack Flashes constantly when sound muted. When headphones are connected, sound is not emitted from Flashes three times when the maximum or the speakers.
Page 28
Part Names Unit (back) (headphones) GAIN switch Sets the gain level for your headphones. Select HI when the sound is low, or select LOW when the sound is too loud. (BLUETOOTH) PAIRING button Sets the unit to the pairing mode. SPEAKERS (speaker output) L/R terminals (page 8) AUTO STANDBY switch When set to ON, the unit turns off automatically if there is no operation...
Page 30
Part Names Remote control (on/standby) button (page 10) Input buttons (page 20, 22) / / / (skip back / play and pause / stop / skip ahead) buttons Controls are available when the BLUETOOTH or USB-A input is selected.
Page 31
When set to on, the unit turns on automatically by making a instead of the remote control BLUETOOTH connection from a BLUETOOTH device (BLUETOOTH STANDBY). SongPal is the application for controlling Sony audio PAIRING button (page 17) devices from smartphones/iPhones. Once SongPal is installed on your smartphones/ VOL + and ...