About This Document; Legal Considerations; Trademark Acknowledgments; Electromagnetic Compatibility (Emc) - Axis M3037-PVE Installation Manual

About this Document

This document includes instructions for
installing AXIS M3037-PVE Fixed Dome
Camera. Previous experience of
networking will be beneficial when
installing the product.

Legal Considerations

Video and audio surveillance can be
prohibited by laws that vary from
country to country. Check the laws in
your local region before using this
product for surveillance purposes.

Trademark Acknowledgments

Apple, Boa, Bonjour, Ethernet, Internet
Explorer, Linux, Microsoft, Mozilla,
Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW
are registered trademarks of the
respective holders. Java and all Java-
based trademarks and logos are
trademarks or registered trademarks of
Oracle and/or its affiliates. UPnP
certification mark of the UPnP
Implementers Corporation.
Electromagnetic Compatibility
(EMC)
This equipment has been designed and
tested to fulfill applicable standards
for:
• Radio frequency emission when
installed according to the
instructions and used in its intended
environment.
• Immunity to electrical and
electromagnetic phenomena when
installed according to the
instructions and used in its intended
environment.
USA -
This equipment has been tested
using a shielded network cable (STP)
and found to comply with the limits for
a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to
TM which the receiver is connected.
is a
TM • Consult the dealer or an experienced
radio/TV technician for help.
Canada -
apparatus complies with Canadian
ICES-003.
Europe -
fulfills the requirements for RF
emission according to the Class B limit
of EN 55022.
The product shall be connected using a
shielded network cable (STP) that is
properly grounded.
This product fulfills the requirements
for immunity according to EN 61000-
6-1 residential, commercial and light-
industrial environments. This product
fulfills the requirements for immunity
according to EN 61000-6-2 industrial
environments.
This product fulfills the requirements
for immunity according to EN 55024
office and commercial environments
Australia/ New Zealand -
digital equipment fulfills the
This Class B digital
This digital equipment
This