Sennheiser ew 300 IEM Instruction Manual page 10

Evolution wireless
Hide thumbs Also See for ew 300 IEM:
Table of Contents

Advertisement

42
Switching the receiver on
Turn the volume control
on/off switch – the receiver is switched off when the control is turned fully to
the left until it clicks).
Note:
The receiver has a switch-on delay of approx. 1.5 seconds to suppress
the switch-on surge and protect your ears.
Adjusting the volume
Use the volume control
Volume up? – NO!
When people use headphones, they tend to choose a higher volume than
with loudspeakers. Listening at high volume levels for long periods can lead
to permanent hearing defects. Please protect your hearing, Sennheiser
headphones have an excellent sound quality even at low volumes.
Adjusting the balance
During stereo operation, the balance control
between the left and right stereo signal.
During FOCUS operation, the balance control serves to adjust the relative
levels of the two separate channels in the mixed mono signal (for full
description of FOCUS operation see page 49).
Attachment of the receiver to clothing
The EK 300 IEM receiver is attached to e.g. the belt with the supplied clip
. This is reversable so that the receiver can also be attached with the antenna
pointing downwards, if required.
clockwise (the volume control has an integral
to adjust the volume to suit.
serves to adjust the balance

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents