Record Settings; Instant Record; All-Day Record; Playback - KT&C Omni IP KNR-p4Px4 Quick Installation Manual

Quick Installation Guide KNR-p4Px4 KVR-p16Px8

Record Settings

Before you start:
Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. You may refer to the
user manual for detailed information.
Purpose:
Two kinds of record types are introduced in the following section, including Instant Record and All-day Record. And
for other record types, you may refer to the user manual for detailed information.
Note: After rebooting all the manual records enabled are canceled.

Instant Record

On the live view window of each channel, there is a quick setting toolbar which shows on the bottom of the window
when you click on it.
Click the icon to enable the record, and the icon turns to . And click icon to disable the record, then the
icon turns to .

All-day Record

Perform the following steps to set the all-day recording.
On the live view window, right-click the window and move the cursor to the Start Recording option, and select
Continuous Record or Motion Detection Record on your demand.
And click the Yes button in the popup Attention message box to confirm the settings. Then all the channels will start to
record in the selected mode.

Playback

Play back the record files of a specific channel in the live view menu. Channel switch is supported.
•
OPTION 1
20