Canon PowerShot G5X User Manual page 143

8
Choose the target device.
Choose the target device name (either
z
press the [ ][ ] buttons or turn the [ ]
dial), and then press the [ ] button.
9
Install a driver (first Windows
connection only).
When this screen is displayed on the
z
camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
Double-click the connected camera icon.
z
Driver installation will begin.
z
After driver installation is complete, and
z
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
10
Display CameraWindow.
Windows: Access CameraWindow by
z
clicking [Downloads Images From Canon
Camera].
Mac OS: CameraWindow is automatically
z
displayed when a Wi-Fi connection is
established between the camera and
computer.
11
Import images.
Click [Import Images from Camera], and
z
then click [Import Untransferred Images].
Images are now saved to the Pictures
z
folder on the computer, in separate
folders named by date.
Click [OK] in the screen that is displayed
z
after image import is complete.
Use Digital Photo Professional to view
z
images you save to a computer. To view
movies, use preinstalled or commonly
available software compatible with
movies recorded by the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
( = 31) ► [ 4] tab ► [Wi-Fi Settings] ► [Target History] ►
[Off].
● You can also change the camera nickname on the screen in
step 2 ( = 157).
● When the camera is connected to a computer, the camera screen
is blank.
● Mac OS: If CameraWindow is not displayed, click the
[CameraWindow] icon in the Dock.
● To disconnect from the camera, turn off the camera.
● If you chose [PIN Method] in step 6, a PIN code will be displayed
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
][ ] buttons to
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
143