Sending Images To Another Camera - Canon PowerShot G5X User Manual

4
Connect the printer to the network.
In the printer's Wi-Fi setting menu, choose
z
the SSID (network name) displayed on the
camera to establish a connection.
5
Choose the printer.
Choose the printer name (either press the
z
[ ][ ] buttons or turn the [ ] dial), and
then press the [ ] button.
6
Choose an image to print.
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose an image.
Press the [ ] button.
z
Press the [ ][ ] buttons to choose
z
[Print], and then press the [
For detailed printing instructions, see
z
"Printing Images" ( = 178).
To end the connection, press the [ ]
z
button, choose [OK] on the confirmation
screen (either press the [ ][ ] buttons
or turn the [ ] dial), and then press the
[ ] button.
● Connections require that a memory card with saved images be in
the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
( = 31) ► [ 4] tab ► [Wi-Fi Settings] ► [Target History] ► [Off].
● To use another access point, follow steps 3 – 4 in "Using Another
Access Point" ( = 139).

Sending Images to Another Camera

Connect two cameras via Wi-Fi and send images between them as
follows.
● Only Canon-brand cameras equipped with a Wi-Fi function can be
connected to wirelessly. You cannot connect to a Canon-brand camera
that does not have a Wi-Fi function, even if it supports Eye-Fi cards.
] button.
][ ] buttons to
1
Access the Wi-Fi menu.
Access the Wi-Fi menu as described in
z
step 2 in "Adding a Smartphone Using
the Wi-Fi Menu" ( = 137).
2
Choose [ ].
Press the [ ][ ][ ][ ] buttons or turn
z
the [ ] dial to choose [ ], and then
press the [ ] button.
3
Choose [Add a Device].
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [Add a Device], and then
press the [ ] button.
Follow steps 1 – 3 on the target camera
z
too.
Camera connection information will be
z
added when [Start connection on target
camera] is displayed on both camera
screens.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
149