Ball Joint Separator; Leaf Spring Wedge Block; Lca Bushing Removal; Installation - Mercedes-Benz 2005 Sprinter Service Manual

VA
FRONT (Continued)
LOWER BALL JOINT REMOVE / INSTALL - 9294

BALL JOINT SEPARATOR - 9282

LEAF SPRING WEDGE BLOCK - 9288

BUSHING REMOVER / INSTALLER-9302
BUSHINGS
REMOVAL
(1) Remove the lower control arm (Refer to 2 -
SUSPENSION/FRONT/LOWER CONTROL ARM -
REMOVAL).
(2) Install the lower control arm in a vise.
(3) Install special tool C-4212F (Press) with special
tool 9302-1 (Driver) and 9302–3 (Receiver) (Fig. 1).
Fig. 1 LCA BUSHING REMOVAL
1 - SPECIAL TOOL C-4212F (PRESS)
2 - SPECIAL TOOL 9302-1 (DRIVER)
3 - LOWER CONTROL ARM
4 - SPECIAL TOOL 9302-3 (RECEIVER CUP)
5 - BUSHING
(4) Press out the old control arm bushing.

INSTALLATION

(1) Install the new control arm bushing into the
control arm.
(2) Press the new bushing into the control arm
using special tool C-4212F and 9302-1 (Driver) with
9302-2 (Sizer cup) and 9302-4 (Receiver) (Fig. 2).
(3) Press the bushing in all the way until the lip is
seated properly into the control arm.
(4) Install the lower control arm to the vehicle
(Refer to 2 - SUSPENSION/FRONT/LOWER CON-
TROL ARM - INSTALLATION).
FRONT 2 - 3