Viking VK10 Vortex Moving Head User Manual page 8

● Rated Power: 450W
● LED Qty: 19x15W high power 4 in 1 LEDs
● LED Drive Current: 1000mA
● IP Rating： IP20 Indoor or sheltered from Rain Only
● DMX Mode： 21CH（Standard）/ 35CH(Shapes) / 78CH(Extend)
/96CH (Extend RGBW) /92CH (Full)
● Net weight： 15 Kg
● Super mixed colour and rainbow effect.
● 7 programmable custom programs which can be invoked by the DMX controller.
● Fan cooling (fan will change speed with the temperature variation
VK10 VORTEX Operation
The Main principle of controlling and setting the light on the LCD display is with the aid of the 4
buttons for navigation;
Button
MENU
ENTER
UP
DOWN
1) DMX Address setting:
● Press MENU until it shows 【Address】，then press ENTER.
● Change the DMX address with the UP or DOWN buttons and then press ENTER to accept.
2) Function selection
● Press MENU until it shows 【Intro】, then press ENTER
● Press UP or DOWN to select either 【Reset】、or【 Run】.
● To reset the unit to factory defaults choose Reset & press ENTER， then press UP or DOWN to
select【YES】& press ENTER to reset to factory settings
Choose Menu or function exit
Current show menu or enter into the current selected function
Increase the value
Decrease the value
Function