Viking VK10 Vortex Moving Head User Manual page 11

6) Custom Programs
The VK10 Vortex can store 7 custom programmable programs, each with 10 scenes and individual head positions and,
●
colours and fade times.
Press MENU，until it shows 【Edit】，and then press ENTER.
●
Press UP or DOWN to choose the program number to edit 【Pro01】-【Pro07】, and press ENTER，choose each
●
scene to edit【Sc01】-【Sc10】, press enter. and select the following parameters for each scene; 【Red 0-255】、
【Green 0-255】、【Blue 0-255】、【White 0-255】、【Strobe 0-255】、【 Time 0-255】【Fade 0-255】、【Pan
0-255】、【 Tilt 0-255】.
Note: to leave a scene blank ie; not used then set time=0 otherwise there Must be a value greater than 0 in the time field
or the scene will not be included.
7) Test Procedure
Press MENU，until it shows 【Test】，and then press ENTER.
●
Press UP or DOWN to choose 【All】、【Pan&Tilt】 and 【LED】。Select 【All】，to test the motor and LED,
●
Select 【Pan&Tilt】 to test the motor，or 【LED】to test each led in functioning correctly
8) User Custom Operating Settings
Press MENU，until it shows【Set】，and then press ENTER.
●
Press UP or DOWN to choose 【Fan control】、【Disp.setting】、【Pan】、【Tilt】。
●
When selecting 【Fan control】，press ENTER，press UP or DOWN to choose the 3 kinds
●
of Fan control.【Auto】mode will according the lamp's head to auto control the fan's speed.
【High】mode is the fan's high speed operation,【Low】mode is fan's low speed
operation.
When selecting 【Disp.setting】，press ENTER，press UP or DOWN to choose 【Shut off
●
time】、【Flip display】、【Key lock】or 【Disp flash】，
If selecting【Shut off time】，press ENTER ，press UP or DOWN，it can be set LCD backlight close from 2-60 mins.
If selecting【Flip display】，press ENTER，press UP or DOWN，press【ON/OFF】to choose【ON】,the display will
then rotate through 180°。
When selecting【Key lock】，press ENTER，press UP or DOWN，press【ON/OFF】to choose【ON】,when the
backlight is off, the button keys are locked, & operation is invalid at this time. You must enter Up、Down、Up、Down，
press ENTER to confirm the unlock.。
When selecting【Disp flash】，press ENTER，press UP or DOWN, choose【ON】 and the screen's backlight begin to
blink when the equipment is receiving the DMX signal, The screen's backlight will be off when there is no signal.
When selecting【Pan】or【Tilt】，press ENTER，operate UP or DOWN，Choose【Normal】or 【Reverse】to
●
set the forward and reverse operation