Before First Use - Dualit DBL4 Instruction Manual & Guarantee

• Frozen foods with the exception of small pieces of
fruit or ice cubes should not be placed in the
jug.
• Do not insert frozen items into jug taken directly
from a hot dishwasher.
• Do not immerse or wash jug in boiling or very hot
water.
• Do not blend dough, pastry or mashed
potato.
• When blending heavy loads pulse for 30 seconds
and allow cooling until room temperature between
each pulse. Please note that no recipe contained
within the manual is considered a heavy load.
• Do not operate the blender empty.
• Make sure the electrical outlet is rated at the same
voltage as that stated on the bottom of the power
base.
• Use this product with rated voltage A.C. outlet
only.
• Be sure to unplug the A.C. cord when blender is
not being used.
• Switch off the appliance and disconnect from
supply before changing acessories or approaching
parts that move in use.
• Do not plug the appliance in before checking that
the voltage indicated on the rating plate is the same
as the electrical supply voltage.
• If the power cord is damaged it must, for safety
reasons, be replaced by Dualit or an authorised
Dualit repairer.
• Do not operate the blender with a damaged
cord or plug or after appliance malfunctions, or
is dropped or damaged in any manner. Return
appliance to the nearest Authorized Service Centre
for examination, repair or ele ctrical or mechanical
adjustment.
Patent pending, registered design and protected under the U.K. Copyright Designs and Patent Act
and Community Design Regulation.
SAVE THESE
INSTRUCTIONS

BEFORE FIRST USE

When you turn the blender on for the first
time, a "new" smell may be given off, this will
dissipate after a few uses.
Clean all parts in contact with food before using
for the first time.
This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
electric shock, this plug will fit in a polarized
outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not modify
the plug in any way.
Unpack the box with care, keeping all the pack-
aging materials until you are satisfied
rything is present and in working order. Once
satisfied remove any tags from the blender and
recycle the packaging appropriately.
All illustrations are for representation only, your
model may vary from illustrations shown.
7
eve-