Notes For Blending - Dualit DBL4 Instruction Manual & Guarantee

SETTINGS & THIER USES
This chart is only to be used as guide. Auto pulse is suitable for most ingredents, use this setting first then
use the other settings as required.
Setting
BLENDING WARM LIQUIDS
CAUTION: DO NOT BLEND HOT OR BOILING LIQUIDS.
ALWAYS COOL TO BELOW 60OC AND BLEND ONLY 1L AT A TIME.
7.A
COOL BELOW 60
Allow hot items to cool below
60oC before blending. Do not
fill above the 1L mark to avoid
spillages.

NOTES FOR BLENDING

ALWAYS PLACE ONE HAND ON TOP OF THE LID WHEN THE MOTOR IS
RUNNING. DO NOT SHAKE OR LIFT THE JAR WHILST BLENDING
8.A
REDISTRIBUTING
STOP AND REMOVE THE JAR
OFF THE BASE. Use a spatula
to redistribute the ingredients.
Never use metal utensils, as you
may damage the jar or blade.
Food
Thick smoothies
Any tough ingredients (below 60oC)
Chopping nuts / onions
Addional pulses after auto pulsing
Fine crushed ice / iced snow
Chopped ice (press stop after 2-3 pulses)
Warm soups (below 60oC)
Course chopping
Thin fruit drinks
Batters
Ice based fruit drink
Lean meats
Purees / Baby food
Sauces (Thick)
7.B
C REMOVE FILLER CAP
o
Place a hand wearing a heat
proof glove on the lid. Do not
fully cover the filler hole, to
allow the steam to escape.
8.B
ADDING
Add additional ingredients in to
the blender through the filler
cap aperture. Do not do this
when blending warm items.
7.C
Use speed 1 for blending warm
items.
Do not use Auto pulse
function when blending warm
liquids.
8.C
Whilst blending do not
shake the jar or lift off the
jar. If the motor is running
this will permanently damage
the drive coupling.
10
Blending Time
Press once
Press once
As required
2 - 6 pulses
Press once
Press & stop
10 - 30 secs
10 - 20 secs
20 - 30 sec
20/20 secs*
10 - 15 secs
20/20 secs*
10 - 15 secs
20/20 secs*
SPEED 1 ONLY
DO NOT SHAKE OR LIFT