Apt/Dpt Feature Programming For Kx-Ta And Kx-Td Series Pbxs; Programming Your Extension For Lcs - Panasonic KX-TVA50 Subscriber's Manual

7.1 Programming Your Extension for LCS

7 APT/DPT Feature
Programming for
KX-TA and KX-TD
Series PBXs
The following VPS features are functional
on any KX-T7xxx proprietary telephone that
is connected to the PBX.
Programming procedures and
availability may vary by PBX model,
software version, etc. Refer to the
documentation included with the PBX or
consult your dealer for more
information.
7.1 Programming Your
Extension for LCS
Live Call Screening Button
Assignment
Follow the procedure below to assign an
LCS button on your extension.
1. Enter PITS Programming:
a. While on-hook, press the
PROGRAM button or set the
MEMORY switch to "PROGRAM".
b. Enter [99]. (This step is not needed
for KX-TA624 and KX-TA824.) The
display changes to PT-PGM Mode.
2. Press the Flexible (CO or DSS/BLF)
button you want to assign as the LCS
button.
3. Enter: [92].
Screen output: LCS
4. Press the STORE button.
5. To exit the Personal Programming
mode, press the PROGRAM button or
set the MEMORY switch to "SET".
58 Subscriber's Manual
Live Call Screening Cancel Button
Assignment
This program allows you to assign a Flexible
(CO, DSS) button as a Live Call Screening
Cancel button. This button is optional; Live
Call Screening can also be canceled by
pressing the FLASH button.
1. Enter PITS Programming:
a. While on-hook, press the
PROGRAM button or set the
MEMORY switch to "PROGRAM".
b. Enter [99]. (This step is not needed
for KX-TA624 and KX-TA824.) The
display changes to PT-PGM Mode.
2. Press the Flexible (CO or DSS/BLF)
button that you wish to assign as a Live
Call Screening Cancel button.
3. Enter: [93].
Screen output: LCS Cancel
4. Press the STORE button. The STORE
indicator lights.
The display shows the initial
programming mode.
5. To exit the Personal Programming
mode, press the PROGRAM button or
set the MEMORY switch to "SET".
Live Call Screening Password
Assignment
To allow the Live Call Screening feature to
work at an extension, the extension must
have the LCS button lit. To light this button,
press the LCS button, then enter the
password. This password prevents others
from activating the LCS feature and
listening to your messages as they are
being recorded.
1. Lift the handset or press the
SP-PHONE button.
2. Enter the feature number.
KX-TD: [799]
KX-TA1232: [799]
KX-TA: [77 ]
3. Enter a 3-digit password ([000]-[999]) 2
times. KX-TA users must then enter [#].
Document Version 3.0 2010/06