Panasonic KX-TVA50 Subscriber's Manual page 59

You will hear a confirmation tone, then a
dial tone.
Screen output: The 3-digit password
you entered is displayed.
4. Hang up or press the SP-PHONE
button.
Live Call Screening Password
Canceling
To cancel the LCS password, follow the
procedure below.
1. Lift the handset or press the
SP-PHONE button.
2. Enter the feature number.
KX-TD: [799]
KX-TA1232: [799]
KX-TA: [77 ]
3. Enter the password ([000]-[999]).
KX-TA users must then enter [#].
You will hear a confirmation tone, then a
dial tone.
Screen output: Password Cancel
4. Hang up or press the SP-PHONE
button.
Live Call Screening Recording Mode
Assignment
This program allows the VPS to continue
recording the conversation in the mailbox
after the extension intercepts the call during
the Live Call Screening.
1. Enter system programming, then enter
the programming number.
KX-TD500: Programmable through PC
Programming only.
KX-TD: [610]
KX-TA1232: [610]
KX-TA: [620]
2. Press the NEXT button (SP-PHONE).
Screen output: Jack No.? ®
3. Enter the jack number.
Screen output: # _ _ :Stop Rec
(_ _ = the jack number you entered)
4. Press the SELECT button (AUTO ANS)
until the desired selection is displayed.
5. Press the STORE button.
Document Version 3.0 2010/06
7.1 Programming Your Extension for LCS
6. Press the NEXT button (SP-PHONE).
7. Repeat the steps 4 to 6 until all jacks are
programmed.
Live Call Screening Private/
Hands-Free Mode Assignment
This program assigns a VPS response for
when a message is being left in a mailbox.
It determines whether an alert tone is sent
or whether the recorded message is played
through the built-in speaker of the
extension. The default mode is hands-free.
1. Enter Personal Programming:
a. While on-hook, press the
PROGRAM button or set the
MEMORY switch to "PROGRAM".
b. Enter [99]. (This step is not needed
for KX-TA624 and KX-TA824.) The
display changes to PT-PGM Mode.
2. Enter the code that corresponds to the
desired mode.
For Hands-free mode:
KX-TD: [71]
KX-TA1232: [71]
KX-TA: [#11]
For Private mode:
KX-TD: [72]
KX-TA1232: [72]
KX-TA: [#12]
Screen output: Hands-Free or
Private
3. Press the STORE button.
4. To exit the Personal Programming
mode, press the PROGRAM button or
set the MEMORY switch to "SET".
A single line telephone that is connected to
the same extension as a proprietary
telephone can also be used to monitor an
incoming message (not available for
KX-TA). Be sure that Live Call Screening on
the connected proprietary telephone has
been activated. This feature is useful when
you are using a cordless telephone. A tone
sounds to alert the subscriber that a
message is being recorded. To intercept the
call, flash the hook.
Subscriber's Manual 59