Aduance i-tec U3GLAN3HUB User Manual page 6

i-tec USB 3.0 Travel Docking Station
Then select the language of the installation and follow the instructions on the screen. Enter the user
password if necessary.
The monitor may be flashing during the installation of the drivers – this is a standard process. After the
completion of the installation restart the MacBook / PC.
HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO A MACBOOK / PC)
1) Turn ON the MacBook / PC.
2) Connect the USB 3.0 cable on the back panel of the docking station to a free USB 3.0 / 2.0 port of
your notebook / tablet / PC.
3) Subsequently, the automatic installation of the ports in the individual systems will start.
4) After the completion of the installation restart the MacBook / PC.
FREQUENTLY ASKED QUESTIONS
Question: What are the primary graphics card requirements for DisplayLink chipsets in i-tec graphic
adapters and docking stations?
Answer: DisplayLink graphic chipsets are secondary displays. There currently needs to be a primary
graphics card in the system. Windows XP: Under Windows XP, DisplayLink install their own virtual
graphics adapters under device manager and Windows Display Properties. These are independant
of the primary graphics card. Windows Vista and later: Under windows Vista onwards, the
DisplayLink graphics driver works closely with the primary graphic card. DisplayLink works with all
Intel, NVidia, ATI/AMD, NVidia and VIA graphics cards. DisplayLink do not support the SiS or Matrox
graphics cards. DisplayLink may not work if there are multiple graphics cards installed in the PC.
DisplayLink does not support ATI crossfire or NVIDIA SLI configurations. NVIDIA GeForce Go
7700/7900 from v6.3 software. If using DisplayLink with these graphics card, please use an earlier
software release.
Question: After installation of Windows 8.1 the equipment stopped functioning. In Windows 8 it
worked without problems.
Answer: Please install the most recent drivers from our website that you can find in the „Download"
tab for the given product. Windows 8.1 is supported from the DisplayLink 7.4 version.
Question: After installation of Mac OS X 10.9 Mavericks the equipment stopped functioning. In the
previous system version the equipment worked without problems.
Answer: Please install the most recent drivers from our website that you can find in the „Download"
tab for the given product. Mac OS X 10.9 Mavericks is supported from the DisplayLink 2.1 version.
Question: I am using Mac OS X and the audio output is not functioning.
Answer: The current drivers for Mac OS X do not support audio when the equipment is connected to
the USB 3.0 port. Audio can be used only when the equipment is connected to the USB 2.0 port.
Question: The docking station is not functioning with a tablet and Windows 8.
Answer: Please install the most recent drivers 7.2 M0 or higher that can be downloaded from
http://www.displaylink.com/support/index.php.
EN
05