Aduance i-tec U3GLAN3HUB User Manual page 5

Note:
Installation of the audio ports (for support of HDMI transfers) and the USB 3.0 port type A is
Ÿ
automatic from the system; other ports need to be installed from the supplied CD.
Before the first connection of the docking station to a notebook / tablet / PC it is necessary first to
Ÿ
install the LAN and VGA / HDMI port from the supplied CD and only then to connect the
equipment to the docking station.
INSTALLATION OF DRIVERS IN WINDOWS XP / VISTA / 7 / 8 / 8.1 / 10 (32/64 BIT VERSION)
Before the first use do not connect the docking station to the notebook / tablet / PC, until you install the
corresponding drivers for the LAN and VGA / HDMI port from the supplied CD. The equipment drivers
need to be installed only before the first use.
Insert the CD with the drivers to the CD drive or download the required software from our website
www.i-tec-europe.eu from the „Download" tab for this product. Install the drivers according to the
following procedure:
For the LAN and VGA / HDMI port select the installation from the Setup.exe file in the directory on the
CD:/ or run the downloaded file, select the language of the installation and follow the instructions on
the screen.
Note:
In Windows Vista / 7 / 8 / 8.1 / 10 install the VGA / HDMI port as the „Administrator". The monitor may
be flashing during the installation of the drivers – this is a standard process. After the completion of
the installation we recommend restarting the notebook / tablet / PC.
HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO A NOTEBOOK /
TABLET / PC)
1) Turn ON the notebook / tablet / PC.
2) Connect the USB 3.0 cable on the back panel of the docking station to a free USB 3.0 / 2.0 port of
your notebook / tablet / PC.
3) Subsequently, the automatic installation of the ports in the individual systems will start.
4) After the completion of the installation restart the notebook / tablet / PC.
INSTALLATION OF DRIVERS IN MAC OS X
Before the first use do not connect the docking station to the MacBook / PC, until you install the
corresponding drivers for the LAN and VGA / HDMI port from the supplied CD. The equipment drivers
need to be installed only before the first use.
Insert the CD with the drivers to the CD drive or download the required software from our website
www.i-tec-europe.eu from the „Download" tab for this product. Install the drivers according to the
following procedure:
For the LAN and VGA / HDMI port select the installation from the DisplayLink_MacOSX.dmg file in
the directory on the CD:/ or run the downloaded file. Decompress the file on the desktop of your
MacBook / PC as a virtual disc, select "Drivers" and then „DisplayLink Software Installer".
Quick Start
EN
04