Cadillac SRX 2015 Owner's Manual page 304

Hide thumbs Also See for SRX 2015:
Table of Contents

Advertisement

Cadillac SRX Owner Manual (GMNA-Localizing-MidEast-8087806) - 2015 -
CRC 1st Edition - 5/19/14
10-66
Vehicle Care
Warning
Fans or other moving engine
parts can injure you badly. Keep
your hands away from moving
parts once the engine is running.
5. Check that the jumper cables do
not have loose or missing
insulation. If they do, you could
get a shock. The vehicles could
also be damaged.
Before you connect the cables,
here are some basic things you
should know. Positive (+) will go
to positive (+) or to a remote
positive (+) terminal if the vehicle
has one. Negative ( ) will go to a
heavy, unpainted metal engine
part or to a remote negative ( )
terminal if the vehicle has one.
Do not connect positive (+) to
negative ( ) or you will get a
short that would damage the
battery and maybe other parts.
Do not connect the negative ( )
cable to the negative ( ) terminal
on the dead battery because this
can cause sparks.
6. Connect the red positive (+)
cable to the positive (+) terminal
on the vehicle with the dead
battery. Use a remote
positive (+) terminal if the vehicle
has one.
7. Do not let the other end touch
metal. Connect it to the
positive (+) terminal of the good
battery. Use a remote
positive (+) terminal if the vehicle
has one.
8. Now connect the black
negative ( ) cable to the
negative ( ) terminal of the good
battery. Use a remote
negative ( ) terminal if the
vehicle has one.
Do not let the other end touch
anything until the next step. The
other end of the negative ( )
cable does not go to the dead
battery. It goes to a heavy,
unpainted metal engine part or
Black plate (66,1)
to a remote negative ( ) terminal
on the vehicle with the dead
battery.
9. Connect the other end of the
negative ( ) cable away from the
dead battery, but not near
engine parts that move. The
electrical connection is just as
good there, and the chance of
sparks getting back to the
battery is much less.
Your vehicle has a remote ( )
terminal for this purpose.
10. Now start the vehicle with the
good battery and run the
engine for a while.
11. Try to start the vehicle that had
the dead battery. If it will not
start after a few tries, it
probably needs service.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents