Cadillac SRX 2015 Owner's Manual page 266

Cadillac SRX Owner Manual (GMNA-Localizing-MidEast-8087806) - 2015 -
CRC 1st Edition - 5/19/14
10-28 Vehicle Care
3. Lift the air cleaner/filter base to
disengage from the three pins.
Low-Beam Headlamps/Daytime
Running Lamps (DRL),
High-Beam Headlamps (Base)
1. From the back side of the
headlamp assembly, remove the
top cap to replace the low-beam
headlamp/DRL bulb.
2. From the back side of the
headlamp assembly, remove the
bottom cap to replace the
high-beam headlamp bulb.
3. Disconnect the electrical
connector.
4. Remove the bulb socket from
the headlamp assembly.
5. Replace the bulb in the bulb
socket.
6. Install the bulb socket in the
headlamp assembly.
7. Connect the electrical connector.
Black plate (28,1)
8. Install the cap with the down
arrow pointing down in the back
of the headlamp assembly.
9. For the driver side, reinstall the
underhood electrical center
cover by latching three clips.
10. For the passenger side,
reinstall the air filter/cleaner
assembly base by pushing to
seat. Verify the base is seated
securely, then install the engine
air filter/cleaner assembly.
High/Low-Beam Headlamps
(Uplevel)
The high/low-beam headlamps on
the uplevel are High Intensity
Discharge (HID) and should be
replaced at the dealer.