Starting A Session On A Vms System - DEC VT1000 Service Manual

5.2 Starting a Session on a VMS System

You can start an X window or video terminal (VTE) session on a system
using a local area transport (LAT).
1. Turn on the terminal. After the power-up self-tests are complete, the
Terminal Manager window appears.
2. From the Terminal Manager window, pull down the Customize menu
and choose the LAT . . . menu item.
• Move the mouse until the arrow-shaped pointer is on the
Customize menu name in the Terminal Manager's menu bar.
• Press (click) and hold down the left button on the mouse. The
Customize pull-down menu appears.
• While holding down the button, move the pointer down to the
LAT . . . menu item.
• Release the mouse button. The Customize LAT dialog box
appears.
NOTE
If you accidentally choose another menu item, dismiss
the new dialog box that appears by clicking on its Cancel
button.
3. Enter a group code into the Customize LAT dialog box.
• Use your keyboard to enter the group code into the text entry
field.
• Click on the Add button. The new group code appears in the
Group Codes scroll box.
• Repeat this procedure for each group code.
• Click on the OK button to dismiss the Customize LAT dialog
box.
4. Choose the Font Path . . . menu item from the Customize menu.
• Pull down the Customize menu in the Terminal Manager's menu
bar.
• Choose the Font Path . . . menu item. The Customize Font Path
dialog box appears.
Starting a Session 63