Lansa Testing - DEC VT1000 Service Manual

26 Testing
To exit NCP:
Enter the following command:
DWT>>>
Ctrl D

2.2.2 LANSA Testing

To run remote diagnostics on the terminal using the local area network
service application (LANSA):
• Enable LANSA.
• Use the LANSA menus to select and run the tests.
NOTE
Before running LANSA, make sure it is available and supported
on your system.
To enable LANSA, enter the following command:
$ RUN LANSA
LANSA displays a series of menus. The following example shows how to
reach the test menu. In the example, the terminal to be tested is on a
node named Mamal.
1. node status
2. select node
3. modify database
4. exit
Next screen
1. exit
2. Chris
3. Mamal
4. Elisa
5. Jim
6. Orrin
Next screen
Functions available for Mamal
1. sysid request
2. counter request
3. privileged functions
4. loop
5. display tests
6. exit
CHOICE: 2
CHOICE: 3