Energy Saving
Use this feature when you want to switch the appliance to
energy-saving operation.
To start operation
q
Select "Energy saving" icon.
(The icon is green.)
w
Select "ON".
e
Finalize the setting.
Additionally the handle indicator (Green) will blink
3 times.
Handle indicator in operation
Every time you close the door, the indicator will fl ash
●
(Green).
●
If Plasmacluster is also in operation, the indicator will
fl ash 6 times.
(Blue→Green→Blue→Green→Blue→Green)
To cancel operation
It is the same method as starting operation.
Select "OFF" in step 2.
NOTE
While this feature is operating, the inside temperature of
●
the refrigerator and freezer compartment will be higher
than the preset temperature by about 1°C (refrigerator)
and about 2°C (freezer). This is the guide under the
condition of the preset temperature 3°C (refrigerator)
and -18°C (freezer). The display of preset temperature
will not be changed.
The effi ciency of power saving depends on the usage
●
environment (controlling temperature, ambient temperature,
frequency of opening or closing the door, amount of food).
● Cancel this feature when you feel the beverages are not
cooled enough or ice making takes time.
24
SJ-FS79V_TINS-B373CBRZ 12JT [EN]Sec1:24 Sec1:24
SJ-FS79V_TINS-B373CBRZ 12JT [EN]Sec1:24 Sec1:24
Tips for saving energy
■ Keep the ventilation space as much as possible
around the refrigerator.
■ Keep your refrigerator out of direct sunlight, and do
not place next to heat generating appliance.
■ Open your refrigerator door as briefl y as possible.
■ Hot foods should be cooled before storing.
Flashing
■ Place the food evenly on the shelves to allow the
cooling air to circulate effi ciently.
7/30/12 2:01:57 PM
7/30/12 2:01:57 PM