Renault CAPTUR Driver's Handbook Manual page 180

SEAT COVERINGS
10
C
14
B
13
Removing the seatback cover C
– fold down the seatback C to the base
using the stalk 11;
– remove the self-grip bands 15 be-
tween the seatback and the base;
– reinsert the seatback C and ensure
that it is well locked;
– open the zip fasteners 12 and 14 for
the seat back C;
– remove the cover according to the
method shown (movement A).
4.20
(4/5)
11
12
Replacing the seatback cover C
– Position the cover on the seat-
back C;
– keep the rear central seatbelt out of
the way to position the cover;
– close the zip fastener 12 and 14 of
the seatback C;
With the seat covers off,
ensure that the seatbelt
buckles and ISOFIX attach-
ments are clear.
– attach the self-grip bands;
15
– ensure that the seatback cover is
– attach the self-grip bands 13;
– slide the lower cover between the
C
– fold down the seatback C to the base
– attach the self-grip bands 15 be-
– reinsert the seatback C and ensure
correctly positioned C under the
guide of the central seatbelt 10;
seatback C and the base B;
using the stalk 11;
tween the seatbackC and the
base B;
that it is well locked;
When refitting the seat-
back, make sure it is cor-
rectly locked in place.
If seat covers are fitted,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.