Preparation For Embroidery Sewing; Before Attaching Embroidery Unit - Singer XL-580 Instruction Manual

3. PREPARATION FOR EMBROIDERY SEWING

BEFORE ATTACHING EMBROIDERY UNIT

CAUTION before changing presser foot.
* Raise presser foot lifter.
the needle is in its highest position.
1. Remove presser foot screw, presser foot and foot holder.
tightening presser foot screw.
3. Turn hand wheel toward you to move needle up and down,
and check that the embroidery presser foot moves up and
down together with the needle.
Be careful not to touch the needle when
replacing presser foot.
CAUTION
be sure to use full bobbin.
64
Foot holder
Presser foot
Pied de biche zigzag
Pie prensatelas
Presser bar
Barre de pied presseur
Barra de prensatelas
Embroidery presser foot
Pied presseur de broderie
Prensatelas de bordado
Palanca de accionamiento
Needle clamp