Functions Of Operation Switch Panel - Singer XL-580 Instruction Manual

FUNCTIONS OF OPERATION SWITCH
PANEL
1. TACKING STITCH MODE BUTTON
and the sewing machine makes 4
so tacking stitch will be activated, the position of the tacking
stitches will be at the exact spot in the pattern where the
2. THREAD CUTTER
Press Thread Cutter to automatically cut the top and bobbin
threads.
3. NEEDLE STOP POSITION SELECTOR BUTTON
When the machine is turned on, needle is set at its up-stop
lit. Push it again and it will return to its up-stop position with
4. REVERSE STITCH BUTTON
Reverse sewing is carried out by pushing the reverse stitch
button. The machine will sew 4 stitches in reverse and stop.
5. START/STOP BUTTON
slowly, and when the button is pushed once more, the
machine stops.
will be inactive.
6. LED INDICATOR
Red light indicates machine is operating.
Flashing red light indicates a problem or an error.
* Flashing for 2 - 3 seconds shows that an incorrect
operation was made.
* C o n t i n u o u s f l a s h i n g i n d i c a t e s t h a t t h e m a c h i n e
malfunctions.
7. SPEED CONTROL LEVER
is used, the lever serves as a top speed limiter.
Machine occasionally moves lower speed when it is cold or
when you sew thick fabric.
The lower speed continues until you stop and it will be high
speed after a while if the reason is from cold machine.
If the low speed is due to thick fabric, the lower speed
continues.
30
1
6
Reverse stitch function
for straight and zigzag
stitches
Fonction couture
droits et zigzags
hacia atrás para
costuras rectas y
zigzag
Tacking stitch function
for tie-off of other
stitches
Fonction de point
points
otras puntadas.
2
3
4
5
7