Advertisement
Operation Instructions:
1. Charging Mondo
• Plug the Micro-USB plug into Mondo.
• Plug the other end of the USB cable into a wall power socket or computer USB port.
• The red indicator on Mondo will turn on.
• When the battery is fully charged, the red indicator will turn off and the blue
indicator will turn on. It takes approximately 1.5 hours to fully charge Mondo.
Note:
Before using Mondo for the first time charge it fully. The red light
indicator will flash when the battery is low. At the same time, you will hear a
prompt tone. At this time, please charge Mondo.
2. Power on/off Mondo
• Press and hold the Multi-function button for 3 seconds then the blue LED
light flashes with a prompt tone. Mondo is now turned on.
• Press and hold the Multi-function button for another 3 seconds then the
blue LED light flashes with a prompt tone. Mondo is now turned off.
3. Pairing Mondo
You are required to pair Mondo with your mobile phone once before using it.
• Press and hold the Multi-function button for 5 seconds until you see the
LED light in solid blue to go into the pairing mode.
• Activate Bluetooth® on your mobile phone
• Set your phone to discover 'Mondo' and follow the instruction
• If your phone asks for a passkey or PIN code, confirm with '0000' (4 zeroes).
When the phone and Mondo are paired and connected, you will hear the
prompt tone.
3
Advertisement
