Canon mg6850 series Online Manual page 850

2. Right-click Wireless Network Connections icon on notification area of desktop, and then click
View Available Wireless Networks.
3. Select network name on screen that appears, and then click Connect.
Select "XXXXXX-MGXXXXseries" ("XX" represents alphanumeric characters) as network name.
4. Enter network key on screen that appears, and then click Connect.
By default, the serial number of the machine is used as the network key. Check the serial
number by one of the following methods.
• Check the sticker attached to the machine.
Where Serial Number Is Located
• Display on the touch screen.
Device user settings
• Print the network settings.
Printing Network Settings
5. Use Setup CD-ROM or follow instructions on Canon website.
Cannot Communicate with Machine Using Direct Connection
Make sure machine is turned on.
Check1
Is the
Check2
If the icon is not displayed, tap the icon on the upper right and select Activate direct connect. on the Change
LAN screen.
Make sure machine is selected as connection for wireless communication
Check3
device (e.g. smartphone or tablet).
Select the identifier for direct connection (SSID) specified for the machine as the connection destination for
communication devices.
Have you entered the proper password specified for the direct connection?
Check4
If the security setting of the direct connection is enabled, you need to enter the password to connect your
communication device to the machine.
To check the password specified for the machine, display it using the operation panel of the machine or print
out the network setting information of the machine.
LAN settings
Printing Network Settings
Make sure machine is not too far away.
Check5
Place wireless communication devices a suitable distance from the machine.
icon displayed on the touch screen?
850