Canon EOS 50D Instruction Manual page 155

t(
PictBridge
6
Preparing to Print
Playback the image.
• Press the
<
[B
>
button.
~
The image will appear, and the
<
fI(
>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
... The
<
ddlltV'
>
button lamp will light in
blue.
-- • The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
• When connecting the camera to the printer, do not use any cable other
than the interface cable provided.
• If there is a long beeping sound in step 5, it indicates a problem with the
printer. To find out what's wrong, do the following:
1. Press the <[E]> button to playback the image.
2. Press <@>.
3. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor (p.162).
(]I •
You can also print RAW images taken by this camera.
• If you use the battery to power the camera, make sure it is fully charged.
With a fully-charged battery, printing up to about 3 hours is possible.
• Before disconnecting the cable, turn off the camera and printer first. Hold
the plug (not the cord) to pull out the cable.
• For direct printing, using AC Adapter Kit ACK-E2 (sold separately) to
power the camera is recommended.
155
•