Canon EOS 50D Instruction Manual page 120

Shooting
*
About thelnformati.Qn• • Oisplay
• Each time you press the
<
INFO.
>
button, the information display will
change.
Live View exposure simulation--__---.,
Picture Style -'-'
AF mode·l. .
Drive mode'-"
White balance···_·~~:r
Image-recording quality--
Shutter speed --. . -.
Aperture --
Exposure level----,
AEB range
Flash exposure compensation""--'
Histogram
AF point
(Quick mode)
-- Magnifying frame
AEB
FEB
Flash-ready
·AE lock
Battery check
L_.._
Highlight tone priority
I L
ISO speed
L . . _ . . . _,
Shots remaining
About the
<
II
> icon
• If Live View shooting is done under direct sunlight or other high-temperature
environments, the < Ifi] > icon (warning for the camera's high internal
temperature) may appear on the screen. If Live View shooting continues with
a high internal temperature, it may degrade image quality. You should
therefore stop Live View shooting if the warning icon appears.
• If you use a hard disk-type card and Live View shooting continues while the
< In] >
warning icon is displayed, the camera's internal temperature will
further increase and the Live View shooting will stop automatically. Live View
shooting will be disabled until the camera's internal temperature decreases.
[l] •
The histogram and
<
IBiI
>
icon are displayed when [Exposure
simulation] has been set to [Enable] (p.117). If
<
1m!
>
is blinking, it
indicates that the Live View image is not being displayed at the suitable
brightness due to low or bright light conditions. However, the captured
image will reflect the exposure setting.
• If flash is used or bulb is set, the
<
1m!
>
icon and histogram will be
grayed out (for your reference). The histogram might not be properly
displayed in low light or bright light conditions.
120