Storing Your Brushcutter - Qualcut 3300ST Operating Instructions Manual

3300ST
STORING YOUR
BRUSHCUTTER
Storing the product differs depending on the amount of time it
will be in storage.
Follow these steps to store the product short term:
1. Clean all foreign material from the product.
2. Store in a well-ventilated place that is inaccessible to children.
If you do not intend to use the product for more than one month,
follow these steps to store the product long term:
1. Drain all fuel from tank into a container approved for petrol.
2. Run the engine until it stops.
3. Clean all foreign materials from the product.
4. Remove the spark plug boot, and then the sparkplug.
5. Pour approximately 5ml oil into the cylinder through the
sparkplug hole.
6. Pull the recoil starter 2 or 3 times to distribute the oil over
the cylinder walls.
7. Reinstall the spark plug. Follow the instructions for sparkplug
replacement.
8. Reconnect the spark plug boot.
9. Store the product in a well-ventilated place that is inaccessible`
to children.
CAUTION: Keep the product away from corrosive agents such
as garden chemicals.
IMPORTANT: Abide by all federal and local regulations for the
safe storage, handling and disposal of petrol. Never store this
product with any fuel remaining in the tank, fuel lines or
carburettor. Your warranty does not include coverage for damage
covered by stale or contaminated fuels.
POWER PRODUCTS LL C.
1 7.