Table of Contents
Advertisement
MODELS: WT-46807 / WS-55807 / WS-55857 / WS-55907 /WS-65807 / WS-65857 / WS-65907 / WS-73907
MODELS: WS-65807, WS-65857, WS-65907, WS-73907
The cabinets for the above models are assembled in two pieces. The two pieces may be separated to allow easier
delivery and setup. The following instructions show how to safely separate and re-attach the cabinets.
Note: The guide pins under the cabinet top are prone to breakage if mishandled. Be sure to keep the
cabinet top straight when removing, setting down and re-installing, being careful not to tilt back-
ward or forward on the guide pins.
1) Remove the lower screw from each side of the TV back. On both sides, pull off the two plastic caps, and
remove the two exposed screws.
2) Lift the cabinet top straight up until the guide pins clear the holes in the bottom cabinet. DO NOT use the
screen frame when lifting the cabinet top.
3) Carefully place the cabinet top onto the floor.
4) When reassembling, set the cabinet top on the bottom. Be sure the guide pins align with the holes in the
cabinet bottom. Keep your fingers clear of the edges being joined. Replace the caps and screws that
were removed in step 1.
Step 1
Step 3
CABINET SEPARATION PROCEDURE
Page 13
Step 2
Step 4
Hide quick links:
Advertisement
Table of Contents
