Midi Controller; Restore Factory Settings - Alesis Coda Pro User Manual

MIDI Controller

This piano has 3 independent MIDI controllers, which can be used to control a MIDI device.
Controller Settings
1. Press and hold the Shift button, then press the MIDI Mode button to enter MIDI Mode.
2. Press the MIDI Edit button to enter the MIDI Edit Mode.
3. Press one of the Ctrl 1–Ctrl 3 buttons to individually edit the selected controller. For
example, press the Ctrl 1 button to enter Controller 1 Edit Mode, then you can edit
parameters for Controller 1.
4. Press the Command button. Press the assigned key(s) in the MIDI section for the desired
function.
Note: If you press the assigned key(s) to select the desired command value, press and
hold the Shift button, then tap 3 consecutive keys. For example, tap 0, 6, and 4 in
sequence to set the command value to 64.
5. Press the Data button.
6. Press the Channel button. Set the channel value by pressing the assigned key(s) in the
MIDI section to the desired function.
7. To exit MIDI Mode, press and hold the Shift button, then press the MIDI Mode button.
Controller Output
1. Press and hold the Shift button, then press the MIDI Mode button to enter MIDI Mode.
2. Press the Ctrl 1 button to transmit MIDI information for Controller 1 through the MIDI
output.
3. To exit MIDI Mode, press and hold the Shift button, then press the MIDI Mode button.

Restore Factory Settings

Press and hold +/Yes and –/No buttons together while powering on the piano. The system will
be restored to the default factory settings and will permanently delete all recorded song data.
13