Table of Contents
Advertisement
4. Using thread sealant on male threads,
install burner connection fittings into
1/8" NPT holes on each side of burner
manifold.
5. Press right and left side burners onto
burner connection fittings. Burner porting
should face downward (see Figure 6).
Burner Connection
Fittings
Figure 6 - Installing Burner
8
INSTALLATION
Continued
Burner Manifold
Side
Burners
Burner Inlet Fitting
www.desatech.com
Installation and Gas Connection
1. Place burner pan assembly in center of
fireplace floor. Make sure inlet end of pan
faces gas supply.
2. Thread gas supply fitting to fireplace gas
supply pipe. Use thread sealant.
3. Install adapter fitting onto burner inlet fitting
using thread sealant on male threads of
burner inlet fitting (see Figure 7). Adjust to
most convenient position.
4. Install gas connector tube to gas supply
fitting. Carefully shape tube to attach to
adapter fitting. Be careful not to cause
kinks in tube.
5. Using 1/4" x #8 provided, install cover over
inlet fitting.
Burner Pan
Assembly
Figure 7 - Connecting Gas to Appliance
Gas Flex
Connector
Tube
Adapter Fitting
901260-01C
Advertisement
Table of Contents
