Safety and Maintenance Keep these instructions with your wireless mouse set at all times. The proper set up, use and care can help extend the life of your product. In the event that you transfer ownership of this device, please provide these instructions to the new owner.
• Allow a clearance of at least 50 cm (19.7”) from sources of high- frequency and magnetic interference (TV, mobile telephone, infrared devices, loudspeaker cabinets, etc), in order to avoid malfunctions and loss of data. The distance between the transmitter and the receiver should be greater than 50 cm (19.7”). •...
What’s in the Box? Please check that the following parts and accessories are in the box. If an item is missing please contact your local service centre. • Mouse with laser sensor • Box with 7 weights • Installation software on disc •...
Mouse components A Left mouse button B Programmable buttons C Right mouse button D Four-way button wheel with LED status display. Pressing the wheel to the left or the right will enable a horizontal sequence of images. E Button for setting the sensor scanning rate Each colour indicates another setting:...
Getting started Please connect the mouse to your computer before installing the software. You will be able to use the basic functions of the mouse without installing the software. In order to use the extended functions the software must be installed. Installing the software Information A corresponding dialog box, which can be worded...
Install your software as follows The installation menu will be started automatically if you insert the Information The Autorun function will probably have been deactivated if the automatic Start does not function. Change this setting under Windows®, in your Device Manager, if necessary, by dealing with the CD-DVD-ROM entry and activating the Automatic notification in the case of a change feature.
Connect the mouse to your computer Connect the mouse to your computer as follows: • Refer to the chapter “Safety and Maintenance” first. • Turn on your computer and all connected peripherical devices (monitor, printer, etc.) and wait until the operating system has fully started.
Tab “Programmable Button” This tab allows you to configure the programmable side buttons on the left side or the wheel button of the mouse. Select the desired button in the upper area (wheel button, side button 1, side button 2) and select the desired option below to assign the function with the button.
Inserting/Taking out the weights You can ballast the mouse with max 7 weights à 5.5 grams to gain a better handling. Open the weight compartment by turning the compartment cover on the bottom side towards “OPEN”. Insert one or more weights or take them out of the compartment. Close the weight compartment by putting the cover back on the mouse and turning the compartment cover towards “CLOSE”.
Driver updates and the most up-to-date information on this product can be found at the following Internet address: Internet: www.medion.co.uk If you need further help If the suggestions in the above sections have not helped to solve your problem, please contact us. It will help us to help you if you can have the following information available: •...
Recycling Device At the end of its life, the appliance must not be disposed of in household rubbish. Enquire about the options for environmentally-friendly disposal with your retailer. Packaging All packaging and packaging materials that are no longer required can and should be recycled. Technical Data Technology Laser...
Need help?
Do you have a question about the X81000 and is the answer not in the manual?
Questions and answers