Step Three: Connect To The Water Drain - Honeywell trueease Installation Manual

STEP THREE: Connect to the Water Drain
HE300 ONLY: Return Duct Installation
Before proceeding to Wiring:
I have connected the water supply line to the humidifier and the main water tap.
I have installed the drain connection.
I have checked all plumbing connections for leaks.
14
• Consult and follow local plumbing codes for drain
• The ideal installation is directly to the main floor
• If direct floor drain access is not available, see
1
Connect the 1/2-in. drain hose provided to the drain
fitting on the bottom of the humidifier.
2
Use the hose clamp provided to secure the drain hose
3
to the fitting.
Route the drain hose to the floor drain. The hose must
4
have a continuous downward slope.
Direct the hose outlet into the floor drain. Secure
MCR29881
the hose to reduce the risk of water pooling or
splashing as it drains from the humidifier.
If a return duct installation is required, a trap
must be installed in the drain line. A hard trap is
recommended, but a coil in the line, secured with tape
or zip tie, is also acceptable.
M32929
pipe size and flow requirement.
drain using the rubber hose provided.
"Appendix B: Advanced Draining."
Humidifier 69-2413EF—05