Auto Heat-Up - Miele KM 6388 Operating And Installation Instructions

Auto heat-up

When Auto heat-up has been activated,
the cooking zone switches on automati‐
cally at the highest setting and then
switches to the continued cooking set‐
ting which you have previously selec‐
ted. The heat-up time depends on
which continued cooking setting has
been chosen (see chart).
Activating
 Touch the sensor for the continued
cooking setting you want until a tone
sounds and the sensor starts to flash.
During the heat-up time (see chart), the
continued cooking setting set will flash.
With extended power settings (see
"Programming"), the power settings be‐
fore and after the interim power setting
will flash if an extended power setting
has been selected.
Changing the continued cooking set‐
ting while the cooking zone is heating
up deactivates Auto heat-up.
Deactivating
 Touch the sensor for the continued
cooking setting,
or
 Select a different power setting.
Continued cook‐
ing setting
1
1.
2
2.
3
3.
4
4.
5
5.
6
6.
7
7.
8
8.
9
The continued cooking settings with a dot
after the number are only available if the
power setting range has been extended (see
"Programming").
Operation
Heat-up time
[min : sec]
approx. 0 : 15
approx. 0 : 15
approx. 0 : 15
approx. 0 : 15
approx. 0 : 25
approx. 0 : 25
approx. 0 : 50
approx. 0 : 50
approx. 2 : 00
approx. 5 : 50
approx. 5 : 50
approx. 2 : 50
approx. 2 : 50
approx. 2 : 50
approx. 2 : 50
approx. 2 : 50
–
27