Turntable Installation - Hoover HMC440TX User Instructions

Turntable Installation

Hub (underside)
Enamel tray
Turntable shaft
Important information about installing
environment.
note that this appliance should only be installed by a qualied
technician.
connected to a properlyinstalled earthed socket.
connection must only be done by a quali° ed electrician.
If the plug is no longer accessible following installation,
a pole disconnecting device must be present on the
installation site with a contact gap of at least 3 mm.
used. Overloading can result in fire.
Placement
• Danger! Do not disassemble this appliance. Touching internal components of this
appliance can cause serious personal injury or death.
•
Place the microwave oven on a firm,flat surface.
• Make sure that there is surfi
and sides keep at least 10 cm free.
•
Do not cover the air vents.
•
The adjustable feet should not be r emoved.
• Do not place the micr owave oven near a heat sour c e.
•
Transmitting and receiving equipment such as radios and televisions can af f ect the
operation of the micr owave oven.
EN
a. Never place the enamel tray upside down. The enamal
tray should never be restricted.
b. The enamal tray
c. All food and containers of food are always placed
on the enamel tray for cooking.
d. If enamel tray cracks or
nearest authorized service center .
The accessible surfacemay
be hot duringoperation.
cient ventilation around the micr owave oven. At the rear
11
must
always be used during cooking.
breaks, contact your