HUSTLER ATZ Operator's Manual page 44

PROBABLE
SYMPTOMS
CAUSES
Uneven cutting height The blade(s) are not sharp
A cutting blade(s) is/are
bent
The deck is not level
An anti-scalp wheel is not
set correctly
The underside of the deck
is dirty
Tires improperly inflated
A blade spindle is bent
REV C
SUGGESTED
REMEDIES
Sharpen the blades
Install new cutting blade(s)
Level the deck per the
Deck leveling and height
adjustment section of the
General Service Manual
Adjust the height of the
anti-scalp wheel
Clean the underside of the
deck
Adjust air pressure to 8 - 12
psi (55 - 83 KPa)
Contact your dealer
5-2 604243