Stopwatch - New Balance N2 User Manual

To display the date:
Press SET in Clock mode.
NoTE
If no key is pressed for ten seconds, the display will
return to Clock mode.
To set the alarm:
• Press MoDE to navigate to Alarm mode.
2
1
• Press and hold MoDE to enter settings.
• Press SET to scroll through the setting options. The
setting sequence is as follows: hour; minute.
• Press MoDE to confirm.
To activate or deactivate the alarm:
1. Press MoDE to navigate to Alarm mode.
2. Press SET to turn the alarm on or off. A
indicate that the alarm has been activated.
NoTE
When the alarm clock is activated, it will sound at
the set time every day. Press any button to stop the alarm
for that day. The alarm clock is still active and will set off
again the following day.

SToPWATCH

To use the stopwatch:
• Press MoDE to Navigate to Stopwatch mode.
3
1
• Press ST/SP to start the stopwatch.
• Press ST/SP to stop the stopwatch.
• Press and hold SET to reset.
NoTE
Unless you stop the stopwatch, "
modes to remind you that the stopwatch is still timing.
will
6
2
" will blink in all