Cartridge Filters - PurePro M800-DIRECT FLOW User Manual

Operation regulation
A. With everything connected, turn on the water check for leaks.
B. Make sure the storage tank shut-off valve is "OFF". Open the sink
top faucet.
C. Within a few minutes (up to 15) the water will start to run from the
faucet slowly.
D. Let the water run for at least 30 minutes. This flushes the carbon
filters on first time use.
E. Begin initial flushing.
F. Close the sink top faucet. The system is now ready for use.
11
G. Change filters regularly every 6 to 12 months and have the
membrane checked annually.
Caution
1.Do not use hot water (over 45 C)!
2.Do not freeze the machine!
3.Switch off electricity and water source if away for more than 5 days,
and drain out pure water.
M800-Direct Flow Reverse Osmosis Water Systems
0
URE
DRINKING WATER SYSTEM

Cartridge Filters

Cartridge Filters Filter Description
Stage 1
This 5micron sediment filter is made of 100%
pure polypropylene fibers. High capacity filter
5 Micron
removes dusts, particles and rusts.
Sediment Filter
Stage 2
It takes out 99% of the chlorine and organic
chemicals. It provides enhanced reduction of
GAC Filter
taste, odor, and color.
Stage3
It takes out 99% of the chlorine and organic
chemicals. It provides enhanced reduction of
GAC Filter
taste, odor, and color.
Stage 4
Made in USA. High rejection TFC type membrane
with the capacity of producing 200 gallons per day.
TFC Membrane
This membrane removes the following hard water
contaminants that may be present in your water:
lead, cooper, barium, chromium, mercury, sodium,
cadmium, fluoride, nitrite, nitrate, and selenium.
Stage 5
NSF approved. This post carbon filter is designed
to improve taste. It removes any residual
Post Carbon Filter
impurities and odors from the tank and provides a
finer conditioning of pure water.
M800-Direct Flow Reverse Osmosis Water Systems
URE
DRINKING WATER SYSTEM
Service Life
6 Months
6 Months
6 Months
04
2 Years
1 Year