Panasonic CZ-RELC2 Operating Instructions Manual page 6

2. NAMES AND OPERATIONS (Continued)
Display Section
A: This is displayed to indicate that the system controller is being used for control.
When indicator is fl ashing on the display, the operation is not accepted by the system
controller.
B: When the unit is in the heating standby mode, the
C: This displays the temperature setting.
D: This displays alarm messages when an error occurs.
E: This is displayed when using the temperature sensor in the remote controller.
F: This is displayed only if an abnormality occurs within a unit.
G: The currently selected FAN SPEED is displayed.
H: When the TEST button is pressed, the TEST indicator appears.
I: The currently selected operation mode is displayed.
I
H
F
G
indicator appears.
EN-4
B
A
C
D
E