Specifications - Panasonic DMP-BBT01 Operating Instructions Manual

DMP-BBT01GN-VQT3X48_mst.book 44 ページ ２０１２年３月２７日 火曜日 午後７時４１分

Specifications

Specifications are subject to change without
notice.
Signal system PAL/NTSC
Operating temperature i5 oC to i35 oC
range
Operating humidity 10 % to 80 % RH (no
range condensation)
Digital audio output Optical digital output (Optical
terminal)
HDMI AV output Output connector: Type A
(19 pin) 1 system
SD card slot 1 system
USB slot USB2.0
1 system
Ethernet 10BASE-T/100BASE-TX
1 system
Wireless LAN Standard Compliance:
IEEE802.11 b/g/n
Frequency range: 2.4 GHz
band
Security: WPA
(Encryption Type: TKIP/AES,
Authentication Type: PSK),
WEP (64 bit/128 bit)
LASER Specification Class 1 LASER Product
Wave length: 790 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous
radiation is emitted with the
safety protection
Power supply DC 12 V (DC IN terminal)
Power consumption* Approx. 8.9 W
Power consumption in Approx. 0.5 W
standby mode*
Power consumption in Approx. 4 W
quick start standby
mode*
AC Adaptor Power source: 100 to 240 V,
50/60 Hz
Power consumption: 42 W
DC output: DC 12 W 2500 mA
Dimensions (WkHkD) 179 mmk27 mmk180 mm
Horizontal installation ≥ Including the projecting parts
with no pedestal
Dimensions (WkHkD) 253 mmk95 mmk250 mm
Horizontal diagonal ≥ Including the projecting parts
installation with
pedestal
Mass Approx. 0.9 kg
* Using included AC adaptor
≥ Product identification marking is described on the bottom
side of the main unit and AC adaptor respectively.
44
File format
File
format
MP3
JPEG
DivX
/WPA2
TM TM
MKV
FLAC
WAV
MPO
≥ With certain recording states and folder structures, the play
order may differ or playback may not be possible.
Audio information
The audio output differs depending on which
terminals are connected to the amplifier/receiver,
and the settings on the unit. (
Output)
≥ The number of channels listed is the maximum possible
number of output channels when connected to amplifier/
receiver compatible with the respective audio format.
Terminal
HDMI AV
OUT
OPTICAL
When "BD-Video Secondary Audio" is set to "On", the
*1
audio will be output as Dolby Digital, DTS Digital Surround
or 5.1ch PCM.
*2 The audio output is amplified from 5.1ch or 6.1ch to 7.1ch
depending on the DTS, Inc. specifications.
Extension Reference
This unit supports ID3
tags, but only titles,
".MP3", ".mp3" artist names and album
names can be
displayed.
≥ MOTION JPEG and
Progressive JPEG
are not supported.
≥ You may not be able
".JPG", ".jpg" to play back the file if
you have edited the
folder structure or
the file name on a
PC or other device.
".DIVX", ".divx", ".AVI", ≥ The video file and
".avi" subtitles text file are
inside the same
Subtitles text file
folder, and the file
".SRT", ".srt", ".SUB",
names are the same
".sub", ".TXT", ".txt"
except for the file
extensions.
".MKV", ".mkv"
≥ Some DivX and
Subtitles text file
MKV file may not
".SRT", ".srt", ".SSA",
play back,
".ssa", ".ASS", ".ass"
depending on the
video resolution and
frame rate condition.
Maximum sampling
".flac"
rate: 192 kHz/24 bit
Maximum sampling
".wav"
rate: 48 kHz/16 bit
".mpo" 3D still picture
33, Digital Audio
"Digital Audio Output"
"Bitstream" "PCM"
BD-Video :
Outputs using original 7.1ch PCM
audio DVD-Video :
*1
5.1ch PCM
Dolby Digital/ Down-mixed 2ch
DTS Digital Surround PCM
*1*2