Panasonic DMP-BBT01 Operating Instructions Manual page 37

DMP-BBT01GN-VQT3X48_mst.book 37 ページ ２０１２年３月２７日 火曜日 午後７時４１分
VIERA Link
Set to use "HDAVI Control" function when
connected via HDMI cable to a device that
supports "HDAVI Control".
≥ Select "Off" when you do not want to use
"HDAVI Control".
∫ Unit Settings
Tap to show the following settings:
Standby LED
Set the Standby LED to either light up or turn off
when the unit is turned off.
Unit Operation Volume
Set the volume of operation of this unit.
Edit User Information
Change the user information registered in the
HOME menu.
∫ Quick Start
Speed of startup from standby mode is increased.
≥ When set to "On", the internal control unit will be
powered and the idle power consumption will
increase so compared to when set to "Off".
(About the power consumption
∫ Remote Control
Change the remote control code if other
Panasonic products react to this remote control.
∫ Touchpad Guide
Show the operation guide for the touchpad.
∫ Firmware Update (
Tap to show the following settings:
Automatic Update Check
When this equipment remains connected to the
Internet, it will check for the latest firmware
version when it is turned on and you can update
it if necessary.
Update Now
You can update the firmware manually if a
firmware update is available.
∫ System Information
Tap to show the following settings:
Software Licence
Information about the software used by this unit
is displayed.
Firmware Version Information
Display firmware version of this unit and
wireless LAN module.
∫ DivX Registration
You need this registration code to purchase and
play DivX Video-on-Demand (VOD) content.
44)
∫ Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, language, etc.
18)
37