Cadillac 2008 Escalade Navigation System Owner's Manual page 9

Language — English/Metric
To change the language of the navigation screens, see
"Driver Information Center, DIC Vehicle Customization"
in the Index of your vehicles owner manual.
To change the navigation screens from English or
metric, see "Driver Information Center, DIC Operation
and Displays" in the Index of your vehicles owner
manual.
Deleting Personal Information
This navigation system can record and store personal
information such as names and addresses. At times,
such as when you are disposing of your vehicle,
you may want to delete this information. See "Edit
Address Book — Edit/View" under Configure Menu on
page 2-28 for deleting information from the
address book.
Storing Radio Station Presets
To set preset radio stations, do the following:
1. Press the O (power) knob to turn the system on.
2. Press the AUDIO hard key and select the desired
band (AM, FM1, FM2, XM1, or XM2 (if equipped)).
w
3. Use the (tuning) knob or the SEEK arrows to
tune to the desired station.
4. Press and hold one of the five preset screen
buttons, at the bottom of the screen, until you hear a
beep or see the station displayed on the selected
preset button.
5. Repeat the steps for each preset.
See "Storing Radio Station Presets" under Navigation
Audio System on page 3-2 for more information.
Setting the Clock
The navigation system time and the analog clock are
separate features. Changing the time through the
navigation system will not change the time on the analog
clock and vice versa. See "Analog Clock" in the Index
of your vehicles owner manual to change the analog
clock time.
To set the time for the navigation system, do the
following:
1. Press the CONFIG key to enter the configure menu
options, then press the CONFIG key repeatedly
until the time is selected or touch the time screen
button.
2. Press the Hours and Minutes − (minus) and
+ (plus) signs to decrease or to increase the time.
See "Setting the Clock" under Configure Menu
on page 2-28 for more information.
1-7