Before Use; Read First; To Prevent Damage, Malfunctions, And Faults - Panasonic DMC-FP2 Operating Instructions For Advanced Features

Before use

Read first

■
Fully peel off the strip of
tape from the lens cover
before using the camera.
■
Do a test shot first!
Check first to see if you can take pictures
and record sounds successfully.
■
We will not compensate for failed/
lost recording or for direct/indirect
damage.
Panasonic will not provide compensation
even if damage is caused by faults with
camera or card.
■
Certain pictures cannot be played
back.
• Pictures edited on a computer
• Pictures taken or edited on a different
camera
(Pictures taken or edited on this camera
may also not be able to be played back
on other cameras)
■
Software on the CD-ROM supplied
The following actions are prohibited:
• Making duplicates (copying) for sale
or rent
• Copying onto networks
LCD monitor characteristics
Extremely high precision technology is employed to produce the LCD monitor screen.
However there may be some dark or bright spots (red, blue or green) on the screen.
This is not a malfunction.
The LCD monitor screen has more than 99.99% effective pixels with a mere 0.01% of
the pixels inactive or always lit. The spots will not be recorded on pictures on the built-
in memory or a card.
■
Avoid shocks, vibration, and pressure.
• Avoid exposing the camera to strong
Strip of
tape
• Do not press the lens or the LCD
■
Do not get the camera wet or insert
foreign objects.
This camera is not waterproof.
• Do not expose the camera to water,
• Avoid exposing lens and socket to dust
• When opening and closing the lens
■
Avoid condensation caused by sudden
changes in temperature and humidity.
• When moving between places of
• If the lens clouds up, switch off the
• If the LCD monitor clouds up, wipe with
To prevent damage,
malfunctions, and faults
vibration or shock; e.g. dropping or
hitting the camera, or sitting down with
the camera in your pocket.
(Attach hand strap to avoid dropping
camera. Hanging any items other
than the supplied hand strap from the
camera can apply pressure against it.)
monitor.
rain, or seawater.
(If camera gets wet, wipe with a soft,
dry cloth. Wring cloth thoroughly first if
wet with seawater, etc.)
or sand, and do not allow liquids to leak
into gaps around buttons.
cover, make sure that liquid or foreign
objects such as sand do not enter.
different temperature or humidity, place
camera into a plastic bag and allow to
adjust to conditions before use.
power and leave for about two hours to
allow camera to adjust to conditions.
a soft, dry cloth.
5
VQT2N02